You are here

Home » Products » Boilers - Gas » PEG E Series
  • PEG E Series

    PEG E Series

PEG E Series

PEG E Series

The PEG E Series offers a classic low profile design in seven sizes from 75 MBH to 299 MBH with up to 83.4% AFUE. The PEG E features a one piece, easy to remove front panel which conceals the electronic ignition control. The unit features a depedable cast iron heat exchanger and cast iron push nipples for greater longevity. This atmospheric chimney vent boiler has a rear mounted integral draft hood and vent damper. Two inch single and dual piping risers (depending on boiler size) simplify replacement piping. The PEG-E offers a 10 year non-pro-rated warranty (Residential Applications).

Features

  • Efficiency: Mid-Efficiency
  • Heat Exchanger: Cast Iron
  • Combustion: Atmospheric
  • Venting: Chimney
  • Boiler Type: Steam


  • Redesigned textured paint jacket features an easy to remove, one piece front panel that conceals and protects the electronic ignition control.
  • Dependable Cast Iron Heat Exchanger with Cast Iron Push Nipples. The Sections and Push Nipples expand at the same rate for a water tight seal with greater longevity.
  • LWCO (Probe Type) is located on the side of the boiler allowing for quick inspection and testing. Includes Pressure High Limit Control, Pressure Gauge, Gauge Glass.
  • Atmospheric Chimney Vent Boiler with rear mounted Integral Draft Hood and Vent Damper. Low profile compact design makes it ideal for low clearance installations.
  • Easy piping features with 2” single and dual piping riser options (depending on boiler size), simplifying replacement piping.
  • Stainless Steel Burners.
  • Brass/copper pig tail siphon for long life.
  • 10 Year Non-Prorated Warranty (Residential Applications).
  • Made in the USA.

Options

  • Natural Gas or LP models available
  • Electronic Water Feeder
  • Manual Reset Pressure Switch
  • Low Water Cut-Off
  • Combustible Floor Plate.

Documents / Resources

Current Documents
Archived Documents

Brochure

PEG-E Series Brochure Rev. 01-24-25

User Manual

PEG-E User Manual Rev. A

Installation & Operation Manual

PEG-E IOM Rev. K

Parts Lists

PEG-E Parts Rev. G

Warranty

Utica Boilers Cast Iron Consolidated Warranty Eff 11/24 Rev. D

Technical Bulletin

Flooded HVAC Equipment Bulletin

Engineering Documents / Resources

PEG Near Boiler Piping Rev. B

Brochure

PEG-C Brochure Rev. 10/06
PEG-C Brochure Rev. 10/08
PEG-C Brochure Rev. 5/04
PEG-C Brochure Rev. 6/08
PEG-D Brochure Rev. 10/12
PEG-D Brochure Rev. 8/12
PEG-E Brochure Rev. 10/17
PEG-E Brochure Rev. 11/13
PEG-E Brochure Rev. 2/13
PEG-E Brochure Rev. 6/14
PEG-E Series Brochure 6/19
PEG-E Series Brochure 6/20
PEG-E Series Brochure Rev. 01/21
PEG-E Series Brochure Rev. 9-10-21

Installation & Operation Manual

PEG-C IOM Rev. 15
PEG-C IOM Rev. A
PEG-D IOM Rev. B
PEG-D IOM Rev. C
PEG-E IOM Rev. A
PEG-E IOM Rev. B
PEG-E IOM Rev. C
PEG-E IOM Rev. D
PEG-E IOM Rev. E
PEG-E IOM Rev. F
PEG-E IOM Rev. H
PEG-E IOM Rev. J

Parts Lists

PEG-D Parts Rev. A
PEG-D Parts Rev. B
PEG-E Parts Rev. A
PEG-E Parts Rev. C
PEG-E Parts Rev. D
PEG-E Parts Rev. E
PEG-E Parts Rev. F

Warranty

PEG-C Residential Warranty Rev. 1.0
PEG-D Warranty Rev. 1.0
PEG-E Warranty Rev. 1.0
Utica Boilers Cast Iron Consolidated Warranty Eff 11/24 Rev. C
Utica Consolidated Boiler Warranty Rev. A Eff. 10/20
Utica Consolidated Warranty Rev. D
Utica Consolidated Warranty Rev. E

Engineering Documents / Resources

PEG-C Spec Sheet Rev. A
PEG-C Wiring Addendum Rev. 3

Product Testimonials

  • Job completed timely, professionally and as agreed.

    Christopher Flynn
    New London, CT

  • Yes I'd recommend.  Cause the quality and Price.

    Edmund Goodfield
    Dunmore, PA

  • It is a good product.  Like the convenient way your boilers can be installed.

    Ralph Hawkins
    Detroit, MI

  • My old boiler was also a Utica and it lasted 20 years.

    Michaline Yucik
    Hillside, NJ

  • Efficient, well engineered.

    Robert Migliorino
    Wayne, NJ

  • Yes, easy to work.

    Rodman Galvan
    Elizabeth, NJ

  • Based on our original PEG112 which lasted 20 years, it was a great boiler.  We are having issues with the new PEG-E112.

    Gene Frangella
    Saddle Brook, NJ

  • Very well built.  Third one I owned, last one laster 28 years.

    Ronald Faas
    West Orange, NJ

  • Yes I would recommend, Utica has a great reputation.

    John Pellow
    Belleville, NJ

  • Great product, easy to install and good instructions.

    Nikolin Sokoli
    Bloomfield, NJ

  • Easy install.

    Trevor Ladas
    Harrisburg, PA

  • Superior product with heavy duty cast iron sections.  Excellent product.

    Albert Shelby
    Detroit, MI

  • Yes I would recommend your prodcuts to a friend.  Ease of installation and dependability of the product.

    Eileen Martin
    Methuen, MA

  • I'd recommend this product in the right application.  

    LWCO Tapping is too low to use it as an auto feed sensor. If it were higher, it could be used as one instead of having to time water additions.

    Tony Richardson
    Nashua, NH

  • Looks like a nice unit and sure to be better than my old gas conversion boiler.

    Stephen
    Longmeadow, MA

  • So far boiler is fansastic. Paperwork (packaging) very thorough. A big help. Simple to use and maintain

    John
    Bloomfield, NJ

  • I have installed dozens of Utica Boilers over the last four decades and have had a very good experience with reliability and quality. Keep doing what you're doing don't change.

    Robert
    Enfield, CT

  • Affordable price and history of reliability.

    Kris
    Duryea, PA

  • I had a Burnham that cracked and replaced it with a Utica. The unit is quiet and seems more efficient, I will get a better feel after a year or two of usage. But I love it so far.

    Shawn
    Hallam, PA

  • I would recommend this product. It is simple, quiet and reliable. Reliability is the most important to me. I love the fact that I do not have to worry about my heat. It is also well made. My old unit was the same make and model and lasted more then 30 years. It was destroyed by my mistake in operation

    Ugljesa
    Arlington, MA

  • Clean design, quiet operation, ease of use (low water cutoff), compact. Boiler was just installed - impressed with how quickly it got hot and developed steam (15 minutes)

    William
    Northville, MI

  • I had a Utica 112 & replaced it w/ a Utica 112...and I am happy with my purchase. It's better quality than a Crown Steam Furnace.

    Sakina
    Maplewood, NJ

  • We install several Utica Boilers a year for our customers. We like Utica Boilers for their ease of installation and service and also for their longevity.

    Bob
    Schodack Landing, NY

  • We only install Utica Boilers, my dad says they're the best so we stick with them.

    Glen
    Schodack Landing, NY

  • Very streamlined, very quiet when running. Seems to be very well made.

    Michael
    Hasbrouch Heights, NJ

  • Our previous boiler was a Utica and it lasted 30 years

    Beth
    Steubenville, OH

  • Great product and reliability.

    Dave
    Troy, PA

  • Replaced a 30 year old Utica boiler. Installed my self very satisfied with quality and installation manual. The wiring was made simple with the pre made connectors. Was not the cheapest boiler but the quality made it worth it

    Glen DiStaso
    Metuchen, NJ